Flatbed ATV Utility Trailer

Request a Quote

Kaufman’s versatile flatbed ATV utility trailer is 8′ wide and 20′ long. It comes with 80″ rear slide-in ramps that can be hooked to the back or anywhere on the full length of the sides for loading ATVs. It will accommodate up to four ATVs that are side loaded. Its 20′ length will accommodate two side-by-sides loaded front to rear. Running gear is smooth riding, 3,500 lb. capacity Dexter torsion suspension axles with premium Westlake 205/15 D Range extra capacity Radials. The frame is 5″ channel with 3″ channel crossmembers and heavy duty 6″ flat side rails. Stake pockets and rub rails run the full length of the sides. The tongue is 5″ channel with an adjustable 2 5/16 coupler. A 7,000 lb drop foot jack is included. A sealed wiring harness and lifetime LED lights assure trouble free lighting. This Flatbed ATV Utility Trailer is easy to load and use and will give you many years of reliable hauling of your toys!

Only available from NC plant.

For Parts for Any Kaufman Utility Trailers – Click Here




G.V.W.R. 7,000 GVWR
Electrical Sealed modular wiring harness with LED lights
Frame 5 in channel frame, with 3 in. channel crossmembers 24"o.c.
Dovetail N/A
Upper Deck N/A
Side Rail N/A
Tongue 5 in. Channel
Tires 205/75 R15 (1,820 lb.) Radial
Floors 2 in. Treated Wood
Coupler 2-5/16 Adjustable ball coupler
Safety Chains Heavy duty safety chains
Ramps 80 in. x 14 in. Slide in ramps, with 2 in. x 2 in. x 1/4 in. angle runners
Tie Downs Stake pockets and Rubrail
Deck Length 20 ft.
Deck Height 30 in. loaded
Deck Width 96 in.
Fenders N/A
Lower Deck N/A
Brakes Standard all wheel brakes
Tailgate N/A
Wheels Silver or white mod (Based on stock)
Jack 7,000 lb. Drop foot jack
Axles 2-3,500 lb. e-z lube torsion suspension axles
Suspension Torsion axle suspension
Toolbox N/A
Finish Primed, 2 coats of automotive grade enamel, pin striped